I was totally called out by my friend, @kylerohde today. He claims that most all homeowners are already fully aware of the winterizing “tips & tricks” that I blog about every year. Is this true? Is it common knowledge that you need to leave all of your faucets dripping during freezing temperatures and that you need to check your smoke alarm batteries?

Okay fine.

What about tools. Are you hip to the recommended winterization processes for tools? I bet you’re not, Sen. @kylerohde. Check this out:

OIL
When oil sits around for a period of time, it turns sludgy and makes an engine less efficient. It’s best to drain your tools of any oil and dispose of properly (i.e. not down your toilet or kitchen sink).

FUEL FILTERS
A dirty filter will force an engine to work harder than necessary to draw gas. Do you like to work harder than necessary for any reason whatsoever? Didn’t think so. The winter months are a good time to evaluate, remove and replace filters. (By the way, they’ll only set you back $5-$30 – A cheap date if I ever saw one).

SPARK PLUGS
You’ll find these bad-boys in your gas-powered tools. They ignite the air-fuel mixture that fires your engine up and they get dirty with repeated use. You can pull these out and clean them, or you can pick new ones up for about $3 a piece. Not sure about you, but I’d just assume swap the little suckers out. This is strictly personal preference, however.

FUEL
Fuel will degrade in a tank if left to sit idly for several months. Pick up some fuel stabilizer and follow the directions provided – don’t make up your own, that almost never works out in your favor (speaking from personal experience, here). The stabilizer will keep the gas fresh for about 6 months.

RUST
Your mower used to look all shiny and new, didn’t it? What happened? You abused it with stuck-on soil and muck. That crud traps moisture and when secured next to the metal for a period of time (uh, like a winter), then rust will form and degrade your shiny, yard tool. Before you stow your mow, give it a thorough cleaning. Pull out the putty knife and work with a wire brush.

LUBE
Hinges and moving parts should be sufficiently lubed before storing equipment for the winter season. This will prevent rusting and cracking. Wouldn’t it be great if they made some of that tool lube for humans?

Tweet This Post